Flat Flue Kit | Psyclone Tents
 

Shop

Home >> Shop >> Flat Flue Kit (size 75mm-160mm)

Flat Flue Kit (size 75mm-160mm)

$ 105.00

This flat flue kit allows you to place the flue wherever you desire around the wall of your tent to allow horizontal exit, enabling you to safely vent smoke outside.
This flue jack kit can be used with flues ranging in size from 75mm to 160mm.
Its materials consist of heat proof silicone flashing with stainless steel assembly plates.
The base measurement is 240mm

Disclaimer: We advise not to leave stoves unattended and to make sure they have been extinguished prior to sleeping. Always make sure the stove is placed on a base that is fire retardant. We do not accept any liability for loss or damage incurred by use of the flue kit however caused.

Out of stock

Category: Tag:
Description
This flat flue kit allows you to place the flue wherever you desire around the wall of your tent to allow horizontal exit, enabling you to safely vent smoke outside.
This flue jack kit can be used with flues ranging in size from 75mm to 160mm.
Its materials consist of heat proof silicone flashing with stainless steel assembly plates.
The base measurement is 240mm

Disclaimer: We advise not to leave stoves unattended and to make sure they have been extinguished prior to sleeping. Always make sure the stove is placed on a base that is fire retardant. We do not accept any liability for loss or damage incurred by use of the flue kit however caused.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Flat Flue Kit (size 75mm-160mm)”

Your email address will not be published. Required fields are marked *

ZipPayAfterPay

One tree planted for every purchase.
This flat flue kit allows you to place the flue wherever you desire around the wall of your tent to allow horizontal exit, enabling you to safely vent smoke outside.
This flue jack kit can be used with flues ranging in size from 75mm to 160mm.
Its materials consist of heat proof silicone flashing with stainless steel assembly plates.
The base measurement is 240mm

Disclaimer: We advise not to leave stoves unattended and to make sure they have been extinguished prior to sleeping. Always make sure the stove is placed on a base that is fire retardant. We do not accept any liability for loss or damage incurred by use of the flue kit however caused.

Reviews

There are no reviews yet.

Be the first to review “Flat Flue Kit (size 75mm-160mm)”

Your email address will not be published. Required fields are marked *

  • This flue jack kit can be used with flues ranging in size from 75mm to 160mm
  • The base measurement is 240mm
  • 2 pre drilled clamping rings
  • 1 pre drilled silicone seal
  • 6 bolts and screws
  • 12 washers
  • Cut lines to suit different sizes 75mm – 160mm
  • Suitable for up to 300°C (570°F)